Interactive Transcript
0:00
So let's just start off with, uh,
0:02
some basic anatomy review.
0:03
Each of these will be a real case,
0:04
but we'll just kind of go back and forth.
0:06
Here's a 56-year-old woman
0:08
with new onset atypical chest pain.
0:10
And this is one of the first parts of the way
0:13
that we do a cardiac ct.
0:14
And you don't have to do a coronary CT with, uh,
0:17
specific protocols, but we find
0:19
that being comprehensive helps.
0:20
So, um, this is the axial dataset from
0:24
a calcium scoring scan.
0:25
Uh, and as you know, that's not enough
0:26
to call it a coronary ct.
0:28
Uh, but you can see here we've conned down on the chest.
0:31
So we've maximized our space over resolution.
0:33
We have motion free images,
0:34
and we're looking at the aortic root.
0:35
And you can see my cursor circling the
0:38
right coronary artery.
0:39
Uh, the right coronary artery is the most likely
0:41
to suffer from motion artifacts, but we don't see that here.
0:43
I also don't see any calcified plaque.
0:45
You can tell calcium because it would
0:47
be the density of bone.
0:48
Let's look at the left system here.
0:49
So there's a left main
0:51
or LAD, left anterior
0:52
descending, moving to the anterior side.
0:54
And as it plays one more time, we'll try
0:56
to follow the circumflex, which is probably non-dominant
0:58
as it usually is, and lives here.
1:01
So that's a nice look at the anatomy on a non-contrast ct.
1:04
But what makes things a lot easier is to look
1:06
through contrast, uh, ct.
1:08
So this is a different patient, uh,
1:10
and this is, uh, a gentleman with chest pain
1:13
and he'd actually been into an emergency department, so
1:16
not known disease, but um, soon to be a known disease.
1:19
Um, and you can see there's a lot more slices here
1:21
and that helps us sort out anatomy.
1:23
This is the, uh, ascending aorta.
1:25
This is the pulmonary artery,
1:27
and I'm just gonna, uh,
1:28
focus your eye on the right coronary artery.
1:30
Here's the left, uh, and some plaque.
1:33
Um, but as you can see, we'll, we'll kind
1:35
of watch the right coronary artery as it scrolls down.
1:38
Again, many finer cuts
1:40
and obviously a little cumbersome to look through.
1:42
Just source axial data.
1:44
So there's your right coronary artery
1:45
and we already see some plaque and start to lose the vessel.
1:48
You can also look in here
1:49
and see the left anterior descending,
1:51
some diagonal branches,
1:52
and then the obtuse marginal branch
1:54
of the circumflex artery.
1:56
So, um, we've kind
1:57
of honed our eye on the right coronary artery
1:59
because that's the anatomy of interest
2:01
as you're about to find out.
2:02
Now, when we do these studies, um, it's important
2:05
to look at the source axial data.
2:07
Know that you have high quality data sets,
2:09
and I know there's some other courses that have already
2:10
touched on the basics of coronary ct,
2:12
including one by Dr. Zimmerman.
2:14
And so you could refer to
2:15
that if you're still catching up on, um, how to perform it
2:18
and reformat the ct.
2:20
Uh, I'm gonna now show you how we reformat this case,
2:23
and we'll do this at the workstations in a few minutes.
2:26
But here's that right coronary artery as we spin around it.
2:29
And you can see here this is the right coronary artery
2:31
living in the atrial ventricular groove.
2:33
Um, and this is something that's, um,
2:35
sharpening into the C view, which is a, a view
2:38
that looks like the letter C and it in the cath lab.
2:40
That's the way that the anatomy is displayed.
2:42
And so you can see here a stenosis.
2:44
This is called a multiplanar reformatted image, NPR, uh,
2:48
and it's important to lay out the vessel in the long axis.
2:51
'cause in anyone's, uh, axial slice
2:53
or anyone's short axis slice, it's hard to discern whether
2:56
or not there's a stenosis. Um,
2:58
And then once you've decided whether you think it's a
3:01
significant or not stenosis,
3:02
you'll fit things into boxes here.
3:04
This is the CAD rads, uh, paradigm.
3:06
So it's a reporting and data system,
3:08
multi societal, uh, support.
3:10
Uh, and these are now curved plane reformative views.
3:13
So, uh, this now lays the same vessel out in
3:16
a one single slice.
3:17
In long axis, you would have to spin it
3:19
to see the entire vessel, but, uh,
3:21
we're gonna now decide on stenosis grading.
3:22
So it's no plaque, no stenosis,
3:25
that'll be cadrad zero if there's atherosclerotic plaque,
3:28
but only minimal stenosis, uh, that's cadrad one.
3:31
So maybe up to 20, so percent, 25%.
3:33
Uh, the exact percentage of the grading doesn't matter
3:36
as much as what you think it'll be physiologically.
3:38
So cadrad two, again, it's just mild,
3:40
so nothing even over 50% stenosis.
3:43
Um, here's a CT angiogram with plaque,
3:45
and you can see that dense calcified plaque, plaque blooms.
3:48
So it looks a little bigger, uh, especially relative
3:51
to a small, uh, coronary lumen.
3:53
Depending on your technology, it has more blooming or less,
3:56
but that's, uh, very apparent by ct.
3:59
Less apparent by invasive angiogram.
4:01
In fact, uh, we know
4:02
that the CT scanner can show us
4:04
10,000 densities more than a human.
4:05
I can see we have to window width
4:07
and level to display what we can look at,
4:08
whereas in the Lumino Graham that you get in the cath lab,
4:11
it's basically five densities.
4:12
And here we're really just looking at the lumen of
4:14
that same vessel, um,
4:15
and looking at the degree of narrowing.
4:17
So when you read a cardiac CT
4:18
or you look at the anatomy, you want to think
4:20
that you're probably over representing the calcified plaque,
4:23
um, and that you are, uh, seeing much more the things
4:27
that cause the luminal narrowing, uh,
4:29
than the invasive angiogram that might result.
4:31
And then of course, there's intermediate stenosis, kind
4:34
of a 50, less than 70%, uh, stenosis Here, it's hard
4:37
to say the physiologic significance.
4:39
There's the angiogram.
4:41
Cadres four is the severe stenosis,
4:42
and that's the case I just showed you.
4:44
This is the right coronary artery laid
4:45
out in a long axis view.
4:46
A curved plane, a reformat view, there's a matched cath.
4:50
One last thing to remember when you're looking at normal
4:52
anatomy is that the, the basis of ct, which really happens
4:56
before you have known cad, is
4:58
that the negative predictive value is the sweet spot.
5:00
Meaning if the CT is negative, no further workup needed.
5:03
And that requires looking at all of the coronary segments.
5:06
So this is just a stripped out volume rendered view.
5:08
And what you're seeing here is the aortic root.
5:10
You're seeing the right coronary artery
5:12
where we saw the stenosis in the last patient.
5:13
Different patient, of course, this is the left main,
5:16
the left anterior descending got diagonal branches
5:19
coming off perpendicularly.
5:20
And then towards the septum you'd have small septal
5:22
perforators, circumflex artery, usually non-dominant.
5:25
And that has OBT two marginal branches.
5:27
So in order to call a CT negative, you have
5:29
to have seen every single vessel segment
5:31
and seen that there's no stenosis.
5:33
Now the focus of this course will be much more in the
5:35
setting of known coronary disease, so either higher risk
5:38
or people where we already know that there is stenosis
5:40
and we need to work it up, or we're looking at complications
5:43
of said stenosis.